Comac Group - Kegging & bottling plants
Header content

Latest news from Blog

22 August 2017
Comac machines at Drinktec 2017: Microleaks detection system and Brushless valve
microfughe1 Let’s keep on unveiling the machines that Comac will bring at Drinktec 2017. Today we talk about two absolute innovations in our range and both of them are Comac patented: the Microleaks detection system for keg lines and the Brushless valve for bottles and cans. continue
9 August 2017
Comac machines at Drinktec 2017 – CASSIOPEA 32206-E and PHOENIX 284-E
CASSIOPEA 32206-E 2 On our blog's last post we anticipated that Comac will bring at the fair four machines. Let's get to know them better and outline the features, before you can see them live. continue

Tunnel of heating and cooling

Tunnel of heating and cooling, made of stainless steel AISI 304, to bring to room temperature the products previously packaged, cold or hot.

Comac produces heating and cooling tunnels, necessary to bring to room temperature the products previously packaged, cold or hot.


Both units are made of stainless steel AISI 304; the tanks, that feed the upper showers, are anchored inside the tunnels and outside are positioned all the control devices for both the mechanical cycle and the temperature are positioned outside.


Inside the machine, the bottles and the cans lie on a plastic chain and, thanks to an external gear motor, go forward in the various sections encountering the upper showers, at different temperatures, until reaching the exit. The feed rate of the bottles and cans can be set from an operating panel that allows to vary the duration of the cycle.


Such a cycle has been designed to ensure a saving of cooling water and it has been set by appropriate instrumentation that keeps constant the water temperature in the tanks.


All tanks are equipped with doors on one side to allow the cleaning and periodic maintenance of the unit and with double panel filters, extractable from the pumps side.

 

The doors, made of tempered glass, installed on the entry and exit sides of the machine, allow the manual removal of any containers remaining on the bearing surface at the end of work.

 

The stainless steel electrical panel is provided with an operator panel that allows to verify and set all the control parameters of the machine and an electronic chart recorder that stores the values of all the variables that control all the heating or cooling steps.

Photogallery

Share on socials